summaryrefslogtreecommitdiff
path: root/firmware/target (follow)
Commit message (Expand)AuthorAge
...
* Add UART suuport for s5l8700 and s5l8701Cástor Muñoz2016-05-13
* iPod Classic: updates for uc8702 driverCástor Muñoz2016-05-13
* Red AlertMihail Zenkov2016-04-06
* fix red againMihail Zenkov2016-04-06
* fix redMihail Zenkov2016-04-06
* as3525: reverting I2C2 to non-interrupts versionMihail Zenkov2016-04-05
* Fix checking for CONFIG_CHARGINGMihail Zenkov2016-04-04
* Enable voltage scaling on AMSv2.Michael Giacomelli2016-03-27
* AMSv2: additional delay for voltage scalingMihail Zenkov2016-03-27
* AMSv2: DBOP frequency divided by 2Mihail Zenkov2016-03-27
* Slightly increase VDD2 on AMSv2.Michael Giacomelli2016-03-24
* sd-as3525v2: prevent DTO error and DMA problemsMihail Zenkov2016-03-18
* sd-as3525v2: exit with error if transfer failureMihail Zenkov2016-03-18
* sd-as3525v2: Limit number of retryMihail Zenkov2016-03-18
* usb-s3c6400x: prevent calling usb_enable(enable) twice on USB insertMihail Zenkov2016-03-18
* usb-s3c6400x: prevent lockup if usb extracted during data sendingMihail Zenkov2016-03-18
* HDD16X0: remove unnecessary define.Szymon Dziok2016-03-13
* HDD16X0: fix voltage values and simplify voltage calculation.Szymon Dziok2016-03-13
* HDD63X0: fix values for charging (based on OF).Szymon Dziok2016-03-13
* usb-s3c6400x: fix broken build for LOGF_ENABLECástor Muñoz2016-02-16
* iPod Nano 2G and Classic: Fix power and charging detection.Michael Sparmann2016-02-14
* iPod Classic: fix buffer alignment on HDD driverCástor Muñoz2016-02-14
* iPod Classic: fix build when ATA_HAVE_BBT is not definedCástor Muñoz2016-02-14
* iPod Classic: ATA SMART updatesCástor Muñoz2016-02-14
* usb-s3c6400x: set alignment for ep0_setup_pktCástor Muñoz2016-02-14
* iPod Classic: revert "set initial USB current limit to 500mA"Cástor Muñoz2016-01-29
* iPod Classic: remove uninteresting info in HW debug screenCástor Muñoz2016-01-29
* Replace SAMSUNG_YH920_PAD with YH92XSebastian Leonhardt2016-01-25
* Enable frequency scaling on AMSv2 devices.Mihail Zenkov2016-01-21
* Make sure the system is boosted before enabling USB hardware.Michael Giacomelli2016-01-18
* Increase button delays in preperation for frequency scaling.Michael Giacomelli2016-01-18
* Change the clipv2 button driver to use fixed delays rather than processor cyc...Michael Giacomelli2016-01-18
* Samsung YH92X: Remove unneeded line.Szymon Dziok2016-01-12
* iPod Classic: fix wake-up from power-off on USB insertCástor Muñoz2016-01-12
* iPod Classic: update documentation on PMU targetCástor Muñoz2016-01-12
* iPod Classic: use uncached memory for USB driverCástor Muñoz2015-12-17
* iPod Classic: add non-cached memory regionCástor Muñoz2015-12-17
* iPod Classic: clickwheel fixesCástor Muñoz2015-12-17
* iPod Classic: set initial USB current limit to 500mACástor Muñoz2015-12-17
* iPod Classic: prepare LCD driver for the bootloaderCástor Muñoz2015-12-17
* iPod Classic: s5l8702 clocking rewrite+documentationCástor Muñoz2015-12-17
* YH8xx,YH9xx: Keymap improvementSebastian Leonhardt2015-11-15
* Samsung YH820/YH92X: different way of powering off to avoid poweringSzymon Dziok2015-10-14
* iPod Classic: reads HDD S.M.A.R.T. dataCástor Muñoz2015-10-07
* iPod Classic: initialize USB power configurationCástor Muñoz2015-10-07
* iPod Classic: implement IPOD_ACCESSORY_PROTOCOLCástor Muñoz2015-10-07
* iPod Classic: implement HAVE_SERIALCástor Muñoz2015-10-07
* iPod Classic: introduce s5l8702 UART driverCástor Muñoz2015-10-07
* ipod Classic: implement HAVE_RECORDINGCástor Muñoz2015-10-07
* iPod Classic: use new PL080 DMA driverCástor Muñoz2015-10-07
generated by cgit v1.1 at 2026-05-04 08:25:27 +0000