summaryrefslogtreecommitdiff
path: root/firmware/target (follow)
Commit message (Expand)AuthorAge
...
* Coldfire: Fix the modification of IMR. Interrupts must be masked at the core ...Michael Sevakis2011-06-17
* Remove superfluous executable bits on a bunch of files.Torne Wuff2011-06-08
* fix redMarcin Bukat2011-06-05
* Move dbg_hw_info() into target tree. FS#11735 by meMarcin Bukat2011-06-05
* Android: Greatly simplify the pcm callback mechanism on both, the Java and th...Thomas Martitz2011-06-05
* Android: implement headphone detection thus enabling pause on unplug (FS#12097).Dominik Riebeling2011-06-04
* iAudio boot: Unify common macro valuesJens Arnold2011-06-04
* rk27xx - missing semicolonMarcin Bukat2011-06-04
* fix rockchip i2c driverMarcin Bukat2011-06-04
* Rockchip rk27xx port initial commit. This is still work in progress.Marcin Bukat2011-05-30
* Fix an implicit declaration warning.Dominik Riebeling2011-05-29
* Fix SDL touch screen handling on the screen edgesThomas Jarosch2011-05-25
* Fix a problem where hardware keypresses dont reset the idle poweroff timer on...Jonathan Gordon2011-05-25
* fuze+: implement a full-blown debug screen for touchpad with graphical feedbackAmaury Pouly2011-05-13
* fuze+: implement Synaptics RMI driver on top of i2c, add touchpad debug scree...Amaury Pouly2011-05-11
* fuze+: add init/enable/disable lcd sequences for the second lcd kind (only ba...Amaury Pouly2011-05-10
* Fix tabs in .c and .h files in firmware/ Bertrik Sikken2011-05-08
* Fix whitespace errors aka tabs.Dominik Riebeling2011-05-05
* fuze+: move defines from .c to .h; implement button reading for volume up/dow...Amaury Pouly2011-05-04
* AMSv2 USB: Write usb_delay() in assemblyRafaël Carré2011-05-03
* fuze+: use mdelay and not udelay in lcd sequencesAmaury Pouly2011-05-02
* Sansa Fuze+: initial commit (bootloader only, LCD basically working)Amaury Pouly2011-05-01
* Split off target-specific parts from firmware/drivers/serial.cBertrik Sikken2011-04-23
* ipod6g: make functions and variables static where possibleBertrik Sikken2011-04-22
* Fix issues with iPod nano 2G displays reported on the forums. The voltage sup...Andree Buschmann2011-04-22
* AMS: consistently use bitclr32/bitset32/bitmod32 for register CCU_IO (instead...Bertrik Sikken2011-04-18
* AMSv1 sd: work-around for detection problem with some sd cards (delay after s...Bertrik Sikken2011-04-18
* Define LCD dpi for n900, n8xx and the pandoraThomas Jarosch2011-04-16
* AMS sd: use defines instead of direct values for drive numberBertrik Sikken2011-04-09
* Sansa Clip v2: there's no need to use |= or &= to manipulate a GPIO for the b...Bertrik Sikken2011-04-08
* Sansa clip+: do not set GPIO B7 in the display driver, it's already used for ...Bertrik Sikken2011-04-02
* AMSv2: fix dependency between button light and sd card control for fuze v2 va...Bertrik Sikken2011-04-01
* AMSv2 sd: do not try to switch sd cards into high-speed mode.Bertrik Sikken2011-03-29
* AMSv2 sd: correct CLKENA settings (to stop sd clock when idle) for AMSv2 vari...Bertrik Sikken2011-03-28
* AMSv2 sd: do sd slot switching with GPIO B5 only for AMSv2 variant 1Bertrik Sikken2011-03-28
* AMSv2 SD: use INTERNAL_AS3525 and SD_SLOT_AS3525 defines instead of a direct ...Bertrik Sikken2011-03-26
* AMSv2 SD: wait for response to command SD_STOP_TRANSMISSION instead of ignori...Bertrik Sikken2011-03-26
* AMSv2 SD: reorganise code to select 4-bit mode data transfer mode a bit and a...Bertrik Sikken2011-03-26
* AMSv2 SD: sd card communication speed can be changed back to full speed after...Bertrik Sikken2011-03-26
* iPod Classic storage driver: Fix some implicit casts, typos, ...Michael Sparmann2011-03-24
* fix warning, use unsigned variableRafaël Carré2011-03-24
* SD AMSv2: fix r29625Rafaël Carré2011-03-24
* AMSv2 SD: send 80 idle clocks before sending initial CMD0 (go idle state)Bertrik Sikken2011-03-21
* AMSv2 SD: receive sd card command responses during initialisation instead of ...Bertrik Sikken2011-03-21
* AMSv2 SD: wait for previous data transfer completion before sending a commandBertrik Sikken2011-03-21
* AMSv2 SD: use a sleep instead of a udelay for 100 ms delayBertrik Sikken2011-03-21
* SD AMSv2: fix r29169Rafaël Carré2011-03-20
* SD amsv2: remove double assignementRafaël Carré2011-03-20
* Add another delay in the AMSv2 sd controller driver as a work-around for SD i...Bertrik Sikken2011-03-20
* Android: Implement app shutdown and thus, sleep timer.Thomas Martitz2011-03-16
generated by cgit v1.1 at 2026-05-10 06:01:59 +0000