summaryrefslogtreecommitdiff
path: root/firmware/target (follow)
Commit message (Expand)AuthorAge
...
* as3525: find_first_set_bit() isn't built in bootloadersRafaël Carré2010-05-25
* sdl: call SDL_Quit() before exiting when receiving the SDL_QUIT event. It is ...Amaury Pouly2010-05-25
* as3525: Fix an oops in converting the recording API to a newer form.Michael Sevakis2010-05-24
* Vibe 500: fix the scrolling through the lists by implementing BUTTON_REPEAT f...Szymon Dziok2010-05-24
* fix YUV Dither for the other targets too, like in r26064.Szymon Dziok2010-05-24
* as3525: don't destroy status when calculating IRQ number in UIRQ()Rafaël Carré2010-05-24
* as3525: be sure all interrupts are disabled when recordingRafaël Carré2010-05-24
* Really cleanup remaining r26253 yellow (hopefully).Michael Sevakis2010-05-24
* Cleanup r26253 red and yellow.Michael Sevakis2010-05-24
* Make PCM->driver interface about as simple as it will get. Registered callbac...Michael Sevakis2010-05-24
* as3525*: sd_wait_for_state() is only used for waiting to SD_TRAN stateRafaël Carré2010-05-24
* as3525: show unmasked interrupts on unhandled IRQRafaël Carré2010-05-24
* as3525v2: RTC alarmRafaël Carré2010-05-22
* as3525v2: enable AFE (AUDIO Front End) interruptsRafaël Carré2010-05-21
* ata: do some threading-related corrections (some sync related where it matter...Michael Sevakis2010-05-21
* Clip+: add charging curveRafaël Carré2010-05-21
* usb-as3525v2: fix typo in a comment.Amaury Pouly2010-05-21
* Clipv1: charging curveRafaël Carré2010-05-20
* Clipv1: cosmeticsRafaël Carré2010-05-20
* Clipv1: move buttonlight functions to headerRafaël Carré2010-05-20
* Increaase default ipod 3g contrast, to a value between the last two.Torne Wuff2010-05-20
* Clipv2: charging curve + voltage limitsRafaël Carré2010-05-20
* usb-as3525v2:Amaury Pouly2010-05-20
* fuzev2: charging curve and voltage limitsRafaël Carré2010-05-20
* fix commentsMarcin Bukat2010-05-20
* HD200 - increase sligtly wait states for lcd. This removes clicks in playback...Marcin Bukat2010-05-20
* HD200 - fix button readings afrer PLL settings changeMarcin Bukat2010-05-20
* HD200 - fix PLL settings. This fixes looong standing bug heavily affecting pe...Marcin Bukat2010-05-20
* Gigabeat S: Use longer battery filter; lag is not a problem with voltage for ...Michael Sevakis2010-05-19
* sd-as3525v2: masked interrupts and block size won't change, and DMA won't be ...Rafaël Carré2010-05-19
* as3525: hide our UNCACHED_ADDR from usb_storage.cRafaël Carré2010-05-19
* revert part of r26176 to avoid large static allocationRafaël Carré2010-05-19
* as3525: don't use IRAM for usb, and avoid usb storage using uncached addresse...Rafaël Carré2010-05-19
* Revert r26060. A better fix was found. The acceleration should be fixed once ...Thomas Martitz2010-05-19
* Handshake still grinds to a halt at some point, but it works better now.Tobias Diedrich2010-05-19
* fix previous commitRafaël Carré2010-05-19
* better preprocessor conditions for enabling GPIOA interruptRafaël Carré2010-05-19
* sd-as3525: wait 100µs before disabling SD clocksRafaël Carré2010-05-19
* as3525v2: fix end of charge detectionRafaël Carré2010-05-19
* sd-as3525: avoid division when calculating current bank, we only deal with 1 ...Rafaël Carré2010-05-19
* as3525: reorder vectored interruptsRafaël Carré2010-05-19
* sd-as3525: give timeout in HZ units, not in ticksRafaël Carré2010-05-19
* HD200 - lm339 response time is at best 300 ns so adcclk can not be too highMarcin Bukat2010-05-19
* as3525v2: add partial usb init codeAmaury Pouly2010-05-19
* Gigabeat S: Wrong thing messing with IPU_CONF. No fiddling is needed just yet.Michael Sevakis2010-05-19
* Gigabeat S: Implement LCD contrast, invert and flip modes. Enhance LCD power ...Michael Sevakis2010-05-18
* as3525v2: show adc channels in the debug menuRafaël Carré2010-05-18
* Fuzev1: calibrated charging curveRafaël Carré2010-05-18
* Enable/disable second pll dynamically on usb plugin/remove.Tobias Diedrich2010-05-18
* as3525 usb: build as3525v2 file based on CONFIG_USBOTG, and fix warningsRafaël Carré2010-05-18