| Commit message (Expand) | Author | Age |
|---|
| * | iap: reduce code duplication in iap autobaud code | Bertrik Sikken | 2011-04-23 |
| * | Split off target-specific parts from firmware/drivers/serial.c | Bertrik Sikken | 2011-04-23 |
| * | ipod6g: make functions and variables static where possible | Bertrik Sikken | 2011-04-22 |
| * | Fix issues with iPod nano 2G displays reported on the forums. The voltage sup... | Andree Buschmann | 2011-04-22 |
| * | AMS: consistently use bitclr32/bitset32/bitmod32 for register CCU_IO (instead... | Bertrik Sikken | 2011-04-18 |
| * | AMSv1 sd: work-around for detection problem with some sd cards (delay after s... | Bertrik Sikken | 2011-04-18 |
| * | Define LCD dpi for n900, n8xx and the pandora | Thomas Jarosch | 2011-04-16 |
| * | Fix premature idle shutdown on RaaA after last track finished playing | Thomas Jarosch | 2011-04-16 |
| * | AMS sd: use defines instead of direct values for drive number | Bertrik Sikken | 2011-04-09 |
| * | Sansa Clip v2: there's no need to use |= or &= to manipulate a GPIO for the b... | Bertrik Sikken | 2011-04-08 |
| * | Sansa clip+: do not set GPIO B7 in the display driver, it's already used for ... | Bertrik Sikken | 2011-04-02 |
| * | AMSv2: fix dependency between button light and sd card control for fuze v2 va... | Bertrik Sikken | 2011-04-01 |
| * | AMSv2 sd: do not try to switch sd cards into high-speed mode. | Bertrik Sikken | 2011-03-29 |
| * | AMSv2 sd: correct CLKENA settings (to stop sd clock when idle) for AMSv2 vari... | Bertrik Sikken | 2011-03-28 |
| * | AMSv2 sd: do sd slot switching with GPIO B5 only for AMSv2 variant 1 | Bertrik Sikken | 2011-03-28 |
| * | Skin variables for touchscreen targets (origional implementation by Jens Theeß) | Jonathan Gordon | 2011-03-27 |
| * | AMSv2 SD: use INTERNAL_AS3525 and SD_SLOT_AS3525 defines instead of a direct ... | Bertrik Sikken | 2011-03-26 |
| * | AMSv2 SD: wait for response to command SD_STOP_TRANSMISSION instead of ignori... | Bertrik Sikken | 2011-03-26 |
| * | AMSv2 SD: reorganise code to select 4-bit mode data transfer mode a bit and a... | Bertrik Sikken | 2011-03-26 |
| * | AMSv2 SD: sd card communication speed can be changed back to full speed after... | Bertrik Sikken | 2011-03-26 |
| * | use correct define for gigabeat fx to enable lineout (was broken in r29588) | Robert Kukla | 2011-03-26 |
| * | iPod Classic storage driver: Fix some implicit casts, typos, ... | Michael Sparmann | 2011-03-24 |
| * | fix warning, use unsigned variable | Rafaël Carré | 2011-03-24 |
| * | SD AMSv2: fix r29625 | Rafaël Carré | 2011-03-24 |
| * | AMSv2 SD: send 80 idle clocks before sending initial CMD0 (go idle state) | Bertrik Sikken | 2011-03-21 |
| * | AMSv2 SD: receive sd card command responses during initialisation instead of ... | Bertrik Sikken | 2011-03-21 |
| * | AMSv2 SD: wait for previous data transfer completion before sending a command | Bertrik Sikken | 2011-03-21 |
| * | AMSv2 SD: use a sleep instead of a udelay for 100 ms delay | Bertrik Sikken | 2011-03-21 |
| * | SD AMSv2: fix r29169 | Rafaël Carré | 2011-03-20 |
| * | SD amsv2: remove double assignement | Rafaël Carré | 2011-03-20 |
| * | Add another delay in the AMSv2 sd controller driver as a work-around for SD i... | Bertrik Sikken | 2011-03-20 |
| * | No need to save irq again after thread wakeup in queue_wait(_w_tmo), just dis... | Michael Sevakis | 2011-03-17 |
| * | Android: Implement app shutdown and thus, sleep timer. | Thomas Martitz | 2011-03-16 |
| * | Android: Partly revert r29569 and only call the new getJavaEnvironment() when... | Thomas Martitz | 2011-03-16 |
| * | WM8750/51: properly apply recording gain | Marcin Bukat | 2011-03-15 |
| * | MPIO HD300: Enable line-in recording. Thanks Andriej Azariev for pointing out... | Marcin Bukat | 2011-03-15 |
| * | fix red | Marcin Bukat | 2011-03-14 |
| * | WM8750/51 driver: | Marcin Bukat | 2011-03-14 |
| * | Listen to and follow external Android volume changes. (Based on FS#11914 by M... | Björn Stenberg | 2011-03-14 |
| * | slightly modified FS#11531 by me: WM8750/51 driver rework | Marcin Bukat | 2011-03-14 |
| * | Fix FS#11894 - Sansa Clip+ Volume Buttons don't switch when Upside Down is ac... | Bertrik Sikken | 2011-03-13 |
| * | Android: allocate native_buffer locally, which does away with the need to hold | Maurus Cuelenaere | 2011-03-12 |
| * | Android: Switch to pthread_cond+SIGEV_THREAD for tick task handling. | Thomas Martitz | 2011-03-11 |
| * | Create GlobalRef in surfaceCreated, in accordance to r29572. | Thomas Martitz | 2011-03-11 |
| * | Android: delete the global reference in surfaceDestroyed | Maurus Cuelenaere | 2011-03-11 |
| * | Android: no need to keep RockboxPCM_class around | Maurus Cuelenaere | 2011-03-11 |
| * | Partly revert "Android: use NewGlobalRef for references that are used globally" | Maurus Cuelenaere | 2011-03-11 |
| * | Android: Don't share the JNI environment across threads, but obtain it the | Maurus Cuelenaere | 2011-03-11 |
| * | Android: use NewGlobalRef for references that are used globally | Maurus Cuelenaere | 2011-03-11 |
| * | Enable volume keys in Android. | Björn Stenberg | 2011-03-10 |
