summaryrefslogtreecommitdiff
path: root/firmware (follow)
Commit message (Expand)AuthorAge
...
* Fix a bunch of 'variable set but not used' warnings reported from GCC 4.6.0.Andree Buschmann2011-05-08
* Fix tabs in .c and .h files in firmware/ Bertrik Sikken2011-05-08
* Fix whitespace errors aka tabs.Dominik Riebeling2011-05-05
* fuze+: move defines from .c to .h; implement button reading for volume up/dow...Amaury Pouly2011-05-04
* AMSv2 USB: Write usb_delay() in assemblyRafaël Carré2011-05-03
* fuze+: use mdelay and not udelay in lcd sequencesAmaury Pouly2011-05-02
* iap: pass length and data pointer to iap_handlepkt functions, this prepares f...Bertrik Sikken2011-05-02
* Sansa Fuze+: initial commit (bootloader only, LCD basically working)Amaury Pouly2011-05-01
* Get rid of a committed #define from kernel.h that didn't make the final cut. ...Michael Sevakis2011-04-27
* Commit FS#12069 - Playback rework - first stages. Gives as thorough as possib...Michael Sevakis2011-04-27
* iap: reduce code duplication in iap autobaud codeBertrik Sikken2011-04-23
* Split off target-specific parts from firmware/drivers/serial.cBertrik Sikken2011-04-23
* ipod6g: make functions and variables static where possibleBertrik Sikken2011-04-22
* Fix issues with iPod nano 2G displays reported on the forums. The voltage sup...Andree Buschmann2011-04-22
* AMS: consistently use bitclr32/bitset32/bitmod32 for register CCU_IO (instead...Bertrik Sikken2011-04-18
* AMSv1 sd: work-around for detection problem with some sd cards (delay after s...Bertrik Sikken2011-04-18
* Define LCD dpi for n900, n8xx and the pandoraThomas Jarosch2011-04-16
* Fix premature idle shutdown on RaaA after last track finished playingThomas Jarosch2011-04-16
* AMS sd: use defines instead of direct values for drive numberBertrik Sikken2011-04-09
* Sansa Clip v2: there's no need to use |= or &= to manipulate a GPIO for the b...Bertrik Sikken2011-04-08
* Sansa clip+: do not set GPIO B7 in the display driver, it's already used for ...Bertrik Sikken2011-04-02
* AMSv2: fix dependency between button light and sd card control for fuze v2 va...Bertrik Sikken2011-04-01
* AMSv2 sd: do not try to switch sd cards into high-speed mode.Bertrik Sikken2011-03-29
* AMSv2 sd: correct CLKENA settings (to stop sd clock when idle) for AMSv2 vari...Bertrik Sikken2011-03-28
* AMSv2 sd: do sd slot switching with GPIO B5 only for AMSv2 variant 1Bertrik Sikken2011-03-28
* Skin variables for touchscreen targets (origional implementation by Jens Theeß)Jonathan Gordon2011-03-27
* AMSv2 SD: use INTERNAL_AS3525 and SD_SLOT_AS3525 defines instead of a direct ...Bertrik Sikken2011-03-26
* AMSv2 SD: wait for response to command SD_STOP_TRANSMISSION instead of ignori...Bertrik Sikken2011-03-26
* AMSv2 SD: reorganise code to select 4-bit mode data transfer mode a bit and a...Bertrik Sikken2011-03-26
* AMSv2 SD: sd card communication speed can be changed back to full speed after...Bertrik Sikken2011-03-26
* use correct define for gigabeat fx to enable lineout (was broken in r29588)Robert Kukla2011-03-26
* iPod Classic storage driver: Fix some implicit casts, typos, ...Michael Sparmann2011-03-24
* fix warning, use unsigned variableRafaël Carré2011-03-24
* SD AMSv2: fix r29625Rafaël Carré2011-03-24
* AMSv2 SD: send 80 idle clocks before sending initial CMD0 (go idle state)Bertrik Sikken2011-03-21
* AMSv2 SD: receive sd card command responses during initialisation instead of ...Bertrik Sikken2011-03-21
* AMSv2 SD: wait for previous data transfer completion before sending a commandBertrik Sikken2011-03-21
* AMSv2 SD: use a sleep instead of a udelay for 100 ms delayBertrik Sikken2011-03-21
* SD AMSv2: fix r29169Rafaël Carré2011-03-20
* SD amsv2: remove double assignementRafaël Carré2011-03-20
* Add another delay in the AMSv2 sd controller driver as a work-around for SD i...Bertrik Sikken2011-03-20
* No need to save irq again after thread wakeup in queue_wait(_w_tmo), just dis...Michael Sevakis2011-03-17
* Android: Implement app shutdown and thus, sleep timer.Thomas Martitz2011-03-16
* Android: Partly revert r29569 and only call the new getJavaEnvironment() when...Thomas Martitz2011-03-16
* WM8750/51: properly apply recording gainMarcin Bukat2011-03-15
* MPIO HD300: Enable line-in recording. Thanks Andriej Azariev for pointing out...Marcin Bukat2011-03-15
* fix redMarcin Bukat2011-03-14
* WM8750/51 driver:Marcin Bukat2011-03-14
* Listen to and follow external Android volume changes. (Based on FS#11914 by M...Björn Stenberg2011-03-14
* slightly modified FS#11531 by me: WM8750/51 driver reworkMarcin Bukat2011-03-14
generated by cgit v1.1 at 2026-05-06 04:35:39 +0000