summaryrefslogtreecommitdiff
path: root/firmware/target (follow)
Commit message (Expand)AuthorAge
...
* Clipv2/Clip+: lower DEFAULT/NORMAL frequency from 60MHz to 24MHzRafaël Carré2010-04-03
* Clipv2: reboot to OF when USB is insertedRafaël Carré2010-04-03
* as3525v2: acknowledge USB connection/deconnection in SD threadRafaël Carré2010-04-03
* as3525v2: disable interrupts when writing to the PMU registersRafaël Carré2010-04-03
* Fix someone elses yellow and redJeffrey Goode2010-04-02
* Clip+: remove button_hold() : we use software holdRafaël Carré2010-04-01
* Fuzev2: Scrollwheel works like a charm :)Thomas Martitz2010-04-01
* Fuzev2 LCD: replace delays by calls to lcd_delay() (delays not changed)Rafaël Carré2010-04-01
* Try to fix problems on Clip+ (not sure why they appear randomly)Rafaël Carré2010-04-01
* as3525v2: assume plla is the source for pclk (verified with timer frequency)Rafaël Carré2010-04-01
* Fix boosting on as3525v2Rafaël Carré2010-04-01
* as3525*: make sure fclk is 24MHz before using it as the clock source for pclkRafaël Carré2010-04-01
* as3525*: set up CGU_COUNT register before turning on / modifying PLLsRafaël Carré2010-04-01
* as3525v2: adjustable CPU freq : CGU_PROC is identical to as3525 after allRafaël Carré2010-04-01
* Clipv2/Clip+ : use CHG_IN adc channel, it seems to work better than BVDD and ...Rafaël Carré2010-03-31
* Fix bootloader red, it doesn't have backlight handling.Thomas Martitz2010-03-29
* fuzev2 FM doesn't work (yet), don't try to record from itRafaël Carré2010-03-29
* Fuzev2: Preliminary button support. Scrollwheel does not work yet.Thomas Martitz2010-03-29
* as3525: CGU_USB has only 3 bits for the dividerRafaël Carré2010-03-29
* as3525v2: factorize writing to ascodec PMURafaël Carré2010-03-29
* as3543: name 0x1b & 0x1c registersRafaël Carré2010-03-29
* Clipv2/Clip+ : turn off backlight in 0x1b registerRafaël Carré2010-03-29
* Fuzev2: fix backlight brightnessRafaël Carré2010-03-29
* Fuzev2: it seems we need to set bit 3 when selecting PMU subregisterRafaël Carré2010-03-28
* Fuzev2: cleanup backlight code (still not working correctly)Rafaël Carré2010-03-28
* Fuzev2: fix LCDRafaël Carré2010-03-28
* Fuzev2: fix lcdRafaël Carré2010-03-28
* Fuzev2: fix normal build: enable charging properly, disable FM, use as3525v2 cpuRafaël Carré2010-03-27
* Fuzev2: µSD detect pin is A2 like Clip+, but the meaning is reversedRafaël Carré2010-03-27
* sd-as3525v2.c Organize construction of MCI_COMMAND so it is more apparent w...Jack Halpin2010-03-26
* Fuzev2: fix build, use suited bitmap toolRafaël Carré2010-03-26
* Clip+: fix battery voltage reading when charging : use ADC_RTCSUP like e200v1Rafaël Carré2010-03-26
* Use STORAGE_WANTS_ALIGN to make clear it's not a strict necessityRafaël Carré2010-03-26
* Make storage alignement use cache alignement macrosRafaël Carré2010-03-25
* Fix usb-arc driver: the driver would prematurely mark a transfer as complete ...Amaury Pouly2010-03-25
* sd-as3525v2.c Implement HS timings for those cards that are capable.Jack Halpin2010-03-24
* sd-as3525v2.c Don't reset controller on every pass through the transfer loop.Jack Halpin2010-03-24
* sd-as3525v2.c Adjust comments for MCI_INT bits to show if they are related ...Jack Halpin2010-03-24
* SansaAMSv2: Give register CGU_BASE + 0x3C the name CGU_SDSLOT.Jack Halpin2010-03-23
* No intentional warnings.Björn Stenberg2010-03-23
* Make this properly dependend on the right defines instead of a blacklist.Tobias Diedrich2010-03-23
* Limit AUDIO_IRQ handling to AS3525, since it doesn't work on the newer SoC in...Tobias Diedrich2010-03-23
* fix previous revision by using correct definition of i2c prescalerRafaël Carré2010-03-23
* as3525: do not read i2c2_cpsr* registers because the clock might be disabledRafaël Carré2010-03-23
* fix r25297 : make ascodec-target.h empty when building simRafaël Carré2010-03-23
* Implement software pwm to control c200v2 display brightness.Tobias Diedrich2010-03-23
* Add handler for audio irq.Tobias Diedrich2010-03-23
* Rewrite ascodec_as3514.c to use interrupts.Tobias Diedrich2010-03-23
* sd-as3525v2: read cid & csd in the correct order, fix disk infoRafaël Carré2010-03-22
* sd-as3525v2.c We don't need to disable/enable MCI_CLKENA in send_cmd().Jack Halpin2010-03-22
generated by cgit v1.1 at 2026-05-15 21:27:55 +0000