summaryrefslogtreecommitdiff
path: root/firmware/target (follow)
Commit message (Expand)AuthorAge
...
* sd-as3525v2.c Enable disk access icon.Jack Halpin2010-03-22
* sd-as3525v2.c Use MCI_MASK instead of data_transfer flag to determine if da...Jack Halpin2010-03-22
* sd-as3525v2.c Add macros to distinguish between a CMD error and a DATA error.Jack Halpin2010-03-22
* sd-as3525v2 Remove post transfer wait for state call and move pre transfer w...Jack Halpin2010-03-22
* sd-as3525v2.c Use SD_DESELECT_CARD instead of SD_SELECT_CARD to make the co...Jack Halpin2010-03-22
* Update battery discharge curve and current consumption for iRiver h10 5GB. Th...Andree Buschmann2010-03-21
* Use atomic operation for GPIOx_ENABLEs in ide_power_enable() for iPod Video. ...Andree Buschmann2010-03-21
* sd-as3525v2.c: Correct SD_APP_OP_COND command to send full voltage range for...Jack Halpin2010-03-21
* sd-as3525v2.c: Only manipulate MCI_CLKENA for drive being used.Jack Halpin2010-03-21
* Clip+: enable sound on "as3514" (as3543 in fact)Rafaël Carré2010-03-20
* Submit FS#11065. Introduce a new system setting for en-/disabling the Line-ou...Andree Buschmann2010-03-20
* Submit FS#9746 by Boris Gjenero. Set PP502x IDE pins low for iPod Video when ...Andree Buschmann2010-03-20
* Reset USB bridge properly when selecting bus powered mode. The bridge might h...Jens Arnold2010-03-19
* lcd-ssd1303 (all Clips) : move model specific code in their own filesRafaël Carré2010-03-19
* sd-as3525v2: correctly check send_cmd return value (which is boolean)Rafaël Carré2010-03-18
* SansaAMSv2: Add support for uSD cards to sd-as3525v2.c and activate hotswap ...Jack Halpin2010-03-18
* sd-as3525v2: sd_get_info() is already in common SD codeRafaël Carré2010-03-18
* as3525: Fix previous commit, IRAM_ORIG can not be represented as an immediate...Rafaël Carré2010-03-17
* as3525*: revert r25198 and inline memory_init in crt0.SRafaël Carré2010-03-17
* M:Robe 500 - Improve YUV blit speed.Karl Kurbjun2010-03-17
* A tiny bit more Sansa Fuze v2 work.Thomas Martitz2010-03-16
* Sansa Clipv2: use similar button driver to Clipv1Rafaël Carré2010-03-15
* as3525* : make sure sp is setup in bootloaderRafaël Carré2010-03-15
* as3525*: setup stack pointer before we use itRafaël Carré2010-03-15
* sd-as3525v2: add card hotswap to sd_threadRafaël Carré2010-03-15
* sd-as3525v2: prepare for multidrive buildsRafaël Carré2010-03-15
* as3525: do not assume we can record from microphoneRafaël Carré2010-03-15
* Clip+: si4702 FMRafaël Carré2010-03-15
* sd-as3525v2: reduce the delay before reading responseRafaël Carré2010-03-15
* ftl-nano2g.c: s/\(\*([^)]+)\)\./\1->/Michael Sparmann2010-03-14
* sd-as3525: do not reverse 2 times long responses, read them directly in the n...Rafaël Carré2010-03-14
* sd-as3525v2: do not reverse 2 times long responses, read them directly in the...Rafaël Carré2010-03-14
* sd-as3525v2: delay a bit before reading the command responseRafaël Carré2010-03-14
* Nano2G NAND: Don't continue reading on that bank if starting the read failed.Michael Sparmann2010-03-14
* Finally fast Nano2G NAND reading, also works on remapped blocks this time.Michael Sparmann2010-03-14
* Nano2G: switch over to slow writes at VFL levelMichael Sparmann2010-03-14
* Re-enable fast reads in the Nano2G VFL/FTL. (Using the wrapper API in the NAN...Michael Sparmann2010-03-14
* Implement Nano2G fast NAND read API as a wrapper around the slow one.Michael Sparmann2010-03-14
* Nano2G FTL: Enlarge FTL buffers for faster write operationsMichael Sparmann2010-03-14
* Nano2G VFL/FTL: Use fast writesMichael Sparmann2010-03-14
* Nano2G NAND: Detect if the chip supports interleaved and/or cached writes.Michael Sparmann2010-03-14
* Revert Nano2G fast VFL reads for now. They just won't work on some hardware.Michael Sparmann2010-03-14
* Don't parallelize Nano2G NAND reads, just do pipelined ECC. (10% performance ...Michael Sparmann2010-03-14
* Nano2G VFL: reset the bank again before the second slow read tryMichael Sparmann2010-03-14
* Nano 2G VFL: try slow read twice if fast read failedMichael Sparmann2010-03-14
* More detailed panic message for Nano2G VFL fast read problemsMichael Sparmann2010-03-14
* Make the Nano2G FTL use the new parallel read functionMichael Sparmann2010-03-13
* Add the new Nano2G NAND functions to nand-target.gMichael Sparmann2010-03-13
* Nano2G NAND interleaved erase supportMichael Sparmann2010-03-13
* Nano2G NAND interleaved write supportMichael Sparmann2010-03-13
generated by cgit v1.1 at 2026-05-15 22:21:16 +0000